Product Details:

The OPENLAB is a preparatory system in which the operating principles and functioning of electrical machines are studied. It consists of a set of components and modules suitable for the assembly of a wide range of machines and thanks to the sectioning system developed by De Lorenzo, offers the student a "first view" of the vast and complex world of electrical machines.

With the dissectable machines, students can learn in detail the internal construction of the machines and assemble different typologies, in order to understand the construction techniques before conducting practical tests to determine their operating characteristics.

The low voltage powered system offers greater safety to students, while maintaining industrial grade performance, providing the school with a practical and safe training environment.

  Product Details:

Keysights InfiniiVision 1000 X-Series oscilloscopes are engineered to give you quality, industry-proven technology at unbelievably low prices. Now it’s easy to get professional measurements and accessible expertise at your fingertips. Don’t settle for less  and test to impress.

1. 50 to 100 MHz
2. See more signal detail with 50,000 wfms/sec update rate
3. Have confidence in your measurements with Keysight-custom technology that leverages more than 60 years of oscilloscope expertise
4. Test quickly and easily with a simple, intuitive user interface and built-in help and training signals
5. Get professional-level functionality with industry-leading software analysis and 6-in-1 instrument integration

  Product Details:

Programmable DC Power Supply

Main Features
3 independent controlled and isolated output: 32 V/3.2 A×2, 2.5 V/3.3 V/5 V/3.2 A×1, total power 220 W.Resolution:10 mV/10 mASupports panel timing output functions.LED display; 32 V full scale, 4 digits; 3.2 A full scale, 3 digits100 V/120 V/220 V/230 V compatible design, to meet the needs of different power grids.Intelligent fan for temperature control, effectively reduces noise.Five groups of internal system parameter storage. Supports data storage space expansion.Supports SCPI commands & USB device interface. Includes PC software.

  Product Details:

The Computer Controlled Geothermal (low enthalpy) Energy Unit, "EG5C", designed by EDIBON, consists of a cooling circuit, a small tank with pipes covered with water (bath) and a chilling unit (heat pump). The inside of the earth is simulated with them. There is another tank where the sanitary hot water heated bythe unit is stored.

The cooling circuit consists of a compressor, an air condenser/evaporator, and two water condensers/evaporators. The reason is that the unit has a 4 ways valve that can detect if it is summer or winter by the environmental conditions. According to this, it sends the refrigerant gas to one or another exchanger. So they are able to work as evaporators or condensers of the refrigerant liquid.

The ground is simulated by means of a small tank that covers some pipes and a heat pump.

The water of the tank is at a constant temperature, the same temperature that the earth has at 20 m of depth (15ºC [59ºF] approximately). This water goes to a bath, heating or cooling the water that flows through the pipes immersed in the bath.

Finally, there is a tank to store the water heated by the unit. It simulates the sanitary hot water of a house.

The unit has a cycle inversion valve, which is able to simulate winter and summer conditions, as it was mentioned before. Since the temperature of the earth at 20 m of depth is always 15ºC, this temperature will be higher than the environmental temperature in winter, therefore, the ground is used to heat (heating mode use). However, the environmental temperature in summer will be higher than 15ºC,so the ground’s water will be used to cool (refrigerating mode).

This Computer Controlled Unit is supplied with the EDIBON Computer Control System (SCADA), and includes: The unit itself + a Control Interface Box + a Data Acquisition Board + Computer Control, Data Acquisition and Data Management Software Packages, forcontrolling the process and all parameters involved in the process.